Cucm 8.6 Download

Posted : admin On 8/11/2021

Integrating CUCM 8.6 with Lync 31 Jan 2013

After several days of configuring and troubleshooting, finally got Lync integration with Cisco CUCM 8.6 working in a lab environment. This article walks through the steps taken and some of the problems encountered. Microsoft has a document that provides step-by-step guidance on the integration available for download here which this article is based on. The steps in the document will not be repeated in this article, rather only the specific implementation in the lab and any deviations will be highlighted. The exact version of CUCM used in the lab is 8.6.2.22900-9 which is slightly newer than the 8.5.1.11900-211 version that the document is based on. Nonetheless all the steps in the document are still valid and can be used with some minor changes which are described in this article. Below shows the diagram for the lab setup:

Cucm 8.6 Iso Download.637. Download Free Cisco CallManager Express (CCME) Graphical User Interface (GUI) files! We provide free direct download and instructions on how to install CCME GUI on your CCME router. Provided files cover CCME v3.3, CCME v4.1.0.2, CCME v4.2, CCME v7.1.0.1, CCME v8.5 and CCME v8.6. CUCM (two Subscriber nodes, Publisher, version 8.6.2.25900-8) CUCM (up to 1000 users) CUCM Guest: 2vCPU, 4096Mb vRAM, 80Gb virtual disk; UCCX: one node, version 8.5.1.11004-25; Upgrading the Publisher. The Subscriber should be alive. Descargar dragon ball z tenkaichi tag team para android. Take a Backup (1) – shut down the VM and make a copy.

The Cisco phones have extension 4xxx while the Lync clients have 9xxx. Lync 2010 server is running CU6 with colocated mediation server and media bypass enabled. CUCM users and Lync users should be able to call each other with 4 digit extensions. Below shows the 2 Cisco IP phones registered to CUCM:

Let's recap some CUCM Basics before beginning

CUCM Dial Plans typically consists of Directory Numbers, Route Patterns and Translation Patterns:
Directory Numbers (DN) are internal extensions assigned to phones lines, response groups, voicemail attendants etc.
Route Patterns (RP) are used to match numbers for routing to external PSTN gateways or SIP Trunks.
Translation Patterns (TP) are normalization rules used to manipulate dialed digits before routing a call.
When a user dials a number, the digits are send to CUCM which then uses the DN, TP and RP to perform a Digit Analysis process to determine whether to ring another user or send the call to a SIP Trunk or gateway. In Lync we call this Reverse Number Lookup (RNL). To control whether a user has permissions to ring another user or utilize a route to make PSTN or trunk calls, CUCM uses Partitions and Calling Search Spaces.
Partitions are collections of DNs, RPs and TPs that divide the Dial Plan into segments. For example, Partition Chicago contains directory numbers for users in Chicago and the Route Patterns and Translation Patterns for that locale. Any DN, RP or TP that is not assigned to a paritiion belongs into the Null Partition.
Calling Search Spaces (CSS) are an ordered list of Partitions grouped together and assigned to devices. Numbers in a partition are only reachable by devices that are assigned a CSS that contains that partition. Digit Analysis will only process DNs, TPs and RPs within the CSS assigned to the calling device. Therefore CSS controls what numbers a device can call. CSS can be assigned to phone lines, phone devices, gateways and trunks. Numbers not assigned to any Partition belong to the 'Null Partition' and are reachable by all devices.
A simple illustration is as follows. If Bob wants to call Ann, then Bob's CSS must contain a Partition that Ann's Directory Number belongs to. Similarly, if Bob wants to make a IDD call through a gateway, Bob's CSS must contain a Partition than the Route Pattern for that gateway belongs to. In some sense, CSS's are like PSTN Usages in Lync.
Media Resource Groups (MRG) are logical groupings of media resources such as conference resources, transcoder
resources, MOH servers and Media Termination Points. A Media Resource Group List (MRGL) is simply a prioritized grouping of MRGs. The most common use of MRGs and MRGLs is to restrict media resource usage on a geographic basis. For example, an MRGL can be assigned to a phone at a remote location that only allows it to access local conference bridge resources so that WAN bandwidth is conserved.

Configuring CUCM SIP Trunk

With the baisc CUCM concepts covered, we can proceed to configure the SIP Trunk. As per steps provided in the document, we need to do in the following order:
1. Create SIP Trunk Security Profile
2. Create SIP Profile
3. Create SIP Trunk
4. Create Route Pattern

1. Create SIP Trunk Security Profile
In the lab, we created the SIP Trunk Security Profile with no deviations. The screen capture is shown in the diagram below:
2. Create SIP Profile
Next, for the SIP Profile, we created as per documentation as well with no deviations as shown below:
3. Create SIP Trunk
Before creating the SIP Trunk, we need to define a few more items. The first is the Media Resource Group (MRG)which will then be added to a Media Resource Group List (MRGL). The MRG is defined under Media Resources->Media Resource Group and is shown below:
With the MRG defined we then add it into a MGRL created under Media Resources->Media Resource Group list as shown below:
Next item to define before creating the SIP Trunk would be the Calling Search Space (CSS) under Call Routing->Class of Control->Calling Search Space. Our CSS is defined as shown below:
The CSS shown above contains the Route Partition named 'LyncPartition' which is defined in the Directory Number (Line[1]) of the Phone Configuration of the two Cisco IP Phones along with the CSS 'Outbound to Lync':
The Route Partition 'LyncPartition' contains the necessary translation pattern to translate the incoming number from Lync to CUCM extensions. Translation Patterns can be defined in Call Routing->Translation Pattern and our translation pattern translates E.164 number (without + sign) coming from Lync to a 4-digit CUCM extension:
In this lab, we are translating a 4-digit dialed number from Lync to E.164 for CUCM without the + sign. We will be using the Trunk Configuration to do it as shown later.
Now we are ready to create the SIP Trunk. This is done under Device->Trunk and we have defined the SIP Trunk as shown below:
4. Create Route Pattern
We also need to create Route Patterns for CUCM users to call Lync users using 9XXX 4-digit extensions. This is defined in Call Routing->Route/Hunt->Route Pattern as shown below:

Lync SIP Trunk Configuration for CUCM

Cisco cucm download
As per the MS documentation, these are the tasks to configure Lync Server to perform Direct SIP integration with CUCM:
1. Add CUCM to the Lync topology.
2. Configure the dial plan.
3. Add voice policy and route.
4. Add Trunk configuration.

1. Adding CUCM as a PSTN Gateway using Topology Builder
This is fairly straighforward process of using Topology Builder to a new PSTN Gateway using the IP address of CUCM with port 5060 over TCP:
Next we edit the properties of the Mediation Server and add the newly created gateway into the mediation pool
We then published the topology and made sure there we no errors.
2. Configuring the Dial Plan
We add a normalization rule to the relevent Dial Plan to catch CUCM 4-digit extensions starting with 4XXX. We will perform no translations:
3. Add voice policy and route
Now we edit the Global Voice Policy to add a new PSTN Usage as shown below:
The actual Route matches any dialed number starting with 4 and routes the call to the CUCM as shown below:
4. Add Trunk configuration.
Finaly we add a new Trunk Configuration in Lync. As per the MS documentation, we create a new Pool Trunk Configuration and select the CUCM PSTN Gateway with Encrpytion support set to Optional.
The documentation also specifies enabling Media Bypass and disabling Refer Support followed by running powershell cmdlets to set RTCPActiveCalls and RTCPCallsonHold to false and EnableSessionTime to True.
The remaining steps in the document of enabling Media Bypass in the Global Network Configuration and setting the MediaConfiguration to SupportEncryption are straightforward and are not repeated here. Simply follow the steps in the document.

Q850.1 Errors

We were getting call failures in the beginning and Lync Server's SIP Trace shows errors as below:
ms-diagnostics: 10404;source='LYNC2010.uclab.apac.local';reason='Gateway responded with 404 Not Found (User Not Found)';component='MediationServer';SipResponseCode='404';SipResponseText='Not Found';sip-reason='Q.850;cause=1';GatewayFqdn='10.222.202.152'
ms-diagnostics-public: 10404;reason='Gateway responded with 404 Not Found (User Not Found)';component='MediationServer';SipResponseCode='404';SipResponseText='Not Found';sip-reason='Q.850;cause=1'
Reason
: Q.850;cause=1
ms-trunking-peer: 10.222.202.152
ms-endpoint-location-data: NetworkScope;ms-media-location-
Based on the ITU Recommendation Q.850, this error is due to 'Unallocated (Unassigned) number'. Later we found this to be due to the Device Pool that the CUCM Phones were in did not contain the correct CSS. Device Pools are defined under System->Device Pool. After selecting the correct CSS in the Device Pool, then all was fine and we are able to get calls to/from Lync and CUCM working:

Calling Experience

As mentioned in the beginning, both CUCM users were able to call the Lync users using 4-digit extensions. It also happens that the CUCM users were signed in on phones capable of doing video. The Lync users were signed in on Polycom VVX600 phones running firmware 4.1.2.22625. The 9951 Cisco phones are capable of video when calling each other, but not with Lync due to the way Lync handles calls via the PSTN Gateway which only advertises audio capabilities in the SIP INVITE:
TL_INFO(TF_PROTOCOL) [0]0A10.1A24::02/13/2013-08:53:41.995.001d4d01
(S4,SipMessage.DataLoggingHelper:sipmessage.cs(686))[4068699085]
<<<<<<<<<<<<Incoming SipMessage c=[<SipTlsConnection_1099E63>], 10.250.27.54:5070<-10.250.27.67:63337
INVITE sip:[email protected]:5070;user=phone;transport=tls;maddr=lync2010.uclab.apac.local SIP/2.0
FROM: 'Brennon Kwok' <sip:[email protected]>;tag=E1DEB21B-9B674EF4;epid=0004f2ae4b0d
TO: <sip:4007;[email protected];user=phone>
CSEQ: 1 INVITE
CALL-ID: 5b36d69dccfe4b1b3eae46c179ae4b0d
MAX-FORWARDS: 69
VIA: SIP/2.0/TLS 10.250.27.67:63337;branch=z9hG4bK85B5D519.F2C2544BA9E4FC96;branched=TRUE
VIA: SIP/2.0/TLS 10.250.27.13:35425;branch=z9hG4bK682046e83E0C5E49;ms-received-port=35425;ms-received-cid=540C500
RECORD-ROUTE: <sip:EEPool.uclab.apac.local:5061;transport=tls;ms-fe=LyncEE1.uclab.apac.local;opaque=state:T;lr>;tag=92BEAF9383A0D959E9B155C0472C72CB
ALLOW-EVENTS: conference,talk,hold
CONTACT: <sip:[email protected];opaque=user:epid:4WChQ84TxlyATEooiiwYcwAA;gruu>
CONTENT-LENGTH: 1485
SUPPORTED: replaces
SUPPORTED: ms-safe-transfer
SUPPORTED: ms-bypass
SUPPORTED: ms-dialog-route-set-update
SUPPORTED: timer
SUPPORTED: 100rel
SUPPORTED: gruu-10
USER-AGENT: PolycomVVX-VVX_600-UA/4.1.2.22625
CONTENT-TYPE: application/sdp
ACCEPT-LANGUAGE: en
ALLOW: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER
P-ASSERTED-IDENTITY: 'Brennon Kwok'<sip:[email protected]>,<tel:+6563899228;ext=9228>
ms-application-via: SIP;ms-urc-rs-from;ms-server=LyncEE1.uclab.apac.local;ms-pool=EEPool.uclab.apac.local;ms-application=ad894dc3-55e0-44bf-a07e-3c073aaa4a57
ms-application-via: LYNCMON.uclab.apac.local_;ms-server=LyncEE1.uclab.apac.local;ms-pool=EEPool.uclab.apac.local;ms-application=51FB453D-5B9F-45df-83B4-ADD1F7E604A8
ms-routing-phase: from-uri-routing-done
ms-user-data: ms-publiccloud=TRUE;ms-federation=TRUE
v=0
o=- 1360745635 1360745635 IN IP4 10.250.27.13
s=Polycom IP Phone
c=IN IP4 10.250.27.13
t=0 0
a=sendrecv
m=audio 2230 RTP/AVP 115 9 112 0 8 18 127
a=rtcp:2231
a=candidate:1 1 UDP 2130706431 10.250.27.13 2230 typ host
a=candidate:1 2 UDP 2130706430 10.250.27.13 2231 typ host
a=candidate:2 1 TCP-PASS 6619135 10.250.27.142 51773 typ relay raddr 10.250.27.13 rport 39949
a=candidate:2 2 TCP-PASS 6619134 10.250.27.142 51773 typ relay raddr 10.250.27.13 rport 39949
a=candidate:3 1 UDP 16777215 10.250.27.142 53415 typ relay raddr 10.250.27.13 rport 2730
a=candidate:3 2 UDP 16777214 10.250.27.142 52115 typ relay raddr 10.250.27.13 rport 2731
a=candidate:4 1 TCP-ACT 7012351 10.250.27.142 51773 typ relay raddr 10.250.27.13 rport 39949
a=candidate:4 2 TCP-ACT 7012350 10.250.27.142 51773 typ relay raddr 10.250.27.13 rport 39949
a=candidate:5 1 TCP-ACT 1684733951 10.250.27.13 39949 typ srflx raddr 10.250.27.13 rport 39949
a=candidate:5 2 TCP-ACT 1684733950 10.250.27.13 39949 typ srflx raddr 10.250.27.13 rport 39949
a=crypto:2 AES_CM_128_HMAC_SHA1_80 inline:88sc2BjOStOMZ4A1VyLXlTiliS5xo/C6oKB6Ro1z 2^31 1:1
a=x-bypassid:68628bf5-5ec3-4b6a-a2c3-6ca33793a892
a=rtpmap:115 G7221/32000
a=fmtp:115 bitrate=48000
a=rtpmap:9 G722/8000
a=rtpmap:112 G7221/16000
a=fmtp:112 bitrate=24000
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:127 telephone-event/8000
a=ice-pwd:LY9UIrMskLLh8sBCncz5PtUU
a=ice-ufrag:YoEu
------------EndOfIncoming SipMessage

Conclusion

So it was not trivial to integrate Lync and CUCM even in a simple lab environment but the documentation provided by MS does help tremdously; many thanks to the authors. We hope this article is useful for those who want to test CUCM integration with Lync and many thanks also to my coleague HB Low for providing much assistance on CUCM.
Just thought I'd post a log file from a recent CUCM 8.6.2.21900-5 to 9.1.1.10000-11 upgrade. I had the ISO uploaded to the ESXi datastore, mounted it to the virtual CD drive, and ran the upgrade from the OS Administration GUI.
(Part 3 of 9)
06/01/2013 18:52:44 upgrade_manager.sh Install platform on inactive partition
06/01/2013 18:52:44 upgrade_manager.sh Prepare inactive partition
06/01/2013 18:52:44 upgrade_manager.sh Calling /common/download/9.1.1.10000-11/Cisco/bin/platform_pre_install src_dir=/mnt/source base_dir=/common/download/9.1.1.10000-11 mode=upgrade rpm_archive=/common/rpm-archive/9.1.1.10000-11
06/01/2013 18:52:45 platform_pre_install Initialize setup functions
06/01/2013 18:52:45 platform_pre_install Calling 'source /common/cisco/install/setup/utils.sh'
06/01/2013 18:52:45 platform_pre_install Initialize setup functions complete
06/01/2013 18:52:45 platform_pre_install Parse argument src_dir=/mnt/source
06/01/2013 18:52:45 platform_pre_install Parse argument base_dir=/common/download/9.1.1.10000-11
06/01/2013 18:52:45 platform_pre_install Parse argument mode=upgrade
06/01/2013 18:52:45 platform_pre_install Parse argument rpm_archive=/common/rpm-archive/9.1.1.10000-11
06/01/2013 18:52:45 platform_pre_install Initialize global data
06/01/2013 18:52:45 platform_pre_install Initialize RPM repository variables
06/01/2013 18:52:45 platform_pre_install Initialize global data complete 8.6
06/01/2013 18:52:45 platform_pre_install Copy /mnt/source/Cisco/base_scripts/format_partition.py to /common/cisco/bin
06/01/2013 18:52:45 platform_pre_install Calling 'cp /mnt/source/Cisco/base_scripts/format_partition.py /common/cisco/bin'
06/01/2013 18:52:45 platform_pre_install Start Platform Pre-install RTMTStart
06/01/2013 18:52:45 platform_pre_install Platform Pre-install starting
06/01/2013 18:52:45 platform_pre_install Remove inactive partition from boot loader
06/01/2013 18:52:45 platform_pre_install Calling /common/cisco/bin/prepare_grub --phase L2 --action create --basepath /mnt/source/Cisco --logfile /common/log/install/capture.txt
06/01/2013 18:52:45 platform_pre_install (CAPTURE) prepare_grub: Called with args: --phase L2 --action create --basepath /mnt/source/Cisco --logfile /common/log/install/capture.txt
06/01/2013 18:52:45 platform_pre_install (CAPTURE) ln: creating symbolic link `//boot/grub/menu.lst' to `//boot/grub/grub.conf': File exists
06/01/2013 18:52:45 platform_pre_install (CAPTURE) e_grub: Setting up GRUB for l2 for create action
06/01/2013 18:52:45 platform_pre_install (CAPTURE) [13/06/04_18:52:45] prepare_grub: Created a new /grub/boot/grub/grub.conf with entries from /tmp/active_grub_entry &
06/01/2013 18:52:45 platform_pre_install Remove inactive partition from boot loader complete
06/01/2013 18:52:45 platform_pre_install Format inactive partition
06/01/2013 18:52:45 platform_pre_install Find a partition label for the inactive partition
06/01/2013 18:52:45 platform_pre_install Root label is /
06/01/2013 18:52:45 platform_pre_install Returning inactive partition label '/partB'
06/01/2013 18:52:45 platform_pre_install Find a device for mount point /partB
06/01/2013 18:52:45 platform_pre_install Calling /sbin/findfs LABEL=/partB
06/01/2013 18:52:45 platform_pre_install Returning device '/dev/sda2' for mount point '/partB'

Cucm 8.6 Device Pack Download


06/01/2013 18:52:45 platform_pre_install Calling '/common/cisco/bin/format_partition.py part=/partB label=/partB device=/dev/sda2 pidf=/tmp/format_partition_pid resultf=/tmp/format_partition_results'
06/01/2013 18:52:45 format_partition Argument part=/partB
06/01/2013 18:52:45 format_partition Argument label=/partB
06/01/2013 18:52:45 format_partition Argument device=/dev/sda2
06/01/2013 18:52:45 format_partition Argument pidf=/tmp/format_partition_pid
06/01/2013 18:52:45 format_partition Argument resultf=/tmp/format_partition_results
06/01/2013 18:52:45 format_partition Generate the pid file, /tmp/format_partition_pid
06/01/2013 18:52:45 format_partition Open file /tmp/tmp_file_1823
06/01/2013 18:52:45 format_partition Writing 1823 to /tmp/tmp_file_1823

Cisco Cucm 8.6 Download


06/01/2013 18:52:45 format_partition Renaming /tmp/tmp_file_1823 to /tmp/format_partition_pid
06/01/2013 18:52:45 format_partition Unmount partition /partB
06/01/2013 18:52:45 format_partition Unmount any mounted items on '/partB' mount points
06/01/2013 18:52:45 format_partition Checking mount point /
06/01/2013 18:52:45 format_partition Checking mount point /
06/01/2013 18:52:45 format_partition Checking mount point /dev
06/01/2013 18:52:45 format_partition Checking mount point /proc
06/01/2013 18:52:45 format_partition Checking mount point /sys
06/01/2013 18:52:45 format_partition Checking mount point /selinux
06/01/2013 18:52:45 format_partition Checking mount point /proc/bus/usb
06/01/2013 18:52:45 format_partition Checking mount point /dev/pts
06/01/2013 18:52:45 format_partition Checking mount point /common
06/01/2013 18:52:45 format_partition Checking mount point /dev/shm
06/01/2013 18:52:45 format_partition Checking mount point /grub
06/01/2013 18:52:45 format_partition Checking mount point /partB
06/01/2013 18:52:45 format_partition Checking mount point /spare
06/01/2013 18:52:45 format_partition Checking mount point /proc/sys/fs/binfmt_misc
06/01/2013 18:52:45 format_partition Checking mount point /var/log/ramfs/cm/trace/ccm/sdi
06/01/2013 18:52:45 format_partition Checking mount point /var/log/ramfs/cm/trace/ccm/sdl
06/01/2013 18:52:45 format_partition Checking mount point /var/log/ramfs/cm/trace/ccm/calllogs
06/01/2013 18:52:45 format_partition Checking mount point /var/log/ramfs/cm/trace/ccm/dntrace
06/01/2013 18:52:45 format_partition Checking mount point /var/log/ramfs/cm/trace/cti/sdi
06/01/2013 18:52:45 format_partition Checking mount point /var/log/ramfs/cm/trace/cti/sdl
06/01/2013 18:52:45 format_partition Checking mount point /mnt/source
06/01/2013 18:52:45 format_partition Unmount '/partB'
06/01/2013 18:52:45 format_partition Calling 'fuser -k /partB > /common/log/install/capture.txt 2>&1'
06/01/2013 18:52:45 platform_pre_install Waiting for pid file, /tmp/format_partition_pid
06/01/2013 18:52:45 platform_pre_install Waiting for 'format_partition.py' (1823) to complete
06/01/2013 18:52:46 format_partition Calling 'umount -l /partB > /common/log/install/capture.txt 2>&1'
06/01/2013 18:52:46 format_partition Unmount partition /partB complete
06/01/2013 18:52:46 format_partition Format partition /partB
06/01/2013 18:52:46 format_partition Calling 'mkfs -t ext3 -L /partB /dev/sda2 > /common/log/install/capture.txt 2>&1'
06/01/2013 18:52:46 format_partition Open file /tmp/mkfs_cmd_1823
06/01/2013 18:52:46 format_partition Create mkfs script /tmp/mkfs_cmd_1823
06/01/2013 18:52:46 format_partition Make /tmp/mkfs_cmd_1823 executable
06/01/2013 18:52:46 format_partition Execute /tmp/mkfs_cmd_1823
06/01/2013 18:52:59 format_partition Remove /tmp/mkfs_cmd_1823
06/01/2013 18:52:59 format_partition Calling 'tune2fs -m 1 -C 0 -i 0 -O dir_index /dev/sda2 > /common/log/install/capture.txt 2>&1'
06/01/2013 18:52:59 format_partition (CAPTURE) tune2fs 1.39 (29-May-2006)
06/01/2013 18:52:59 format_partition (CAPTURE) Setting current mount count to 0
06/01/2013 18:52:59 format_partition (CAPTURE) Setting interval between checks to 0 seconds
06/01/2013 18:52:59 format_partition (CAPTURE) Setting reserved blocks percentage to 1% (50954 blocks)
06/01/2013 18:52:59 format_partition Format partition /partB complete
06/01/2013 18:52:59 format_partition Remount partition /partB
06/01/2013 18:52:59 format_partition Calling 'mount -l /partB > /common/log/install/capture.txt 2>&1'
06/01/2013 18:52:59 format_partition Remount partition /partB complete
06/01/2013 18:52:59 format_partition Generate the result file, /tmp/format_partition_results, and exit
06/01/2013 18:52:59 format_partition Open file /tmp/tmp_file_1823
06/01/2013 18:52:59 format_partition Writing 0 to /tmp/tmp_file_1823
06/01/2013 18:52:59 format_partition Renaming /tmp/tmp_file_1823 to /tmp/format_partition_results
06/01/2013 18:53:00 platform_pre_install 'format_partition.py' (1823) is complete (0)
06/01/2013 18:53:00 platform_pre_install Format inactive partition complete
06/01/2013 18:53:00 platform_pre_install Clean up inactive partition log areas
06/01/2013 18:53:00 platform_pre_install Remove files from /var/log/inactive
06/01/2013 18:53:42 platform_pre_install Remove directories from /var/log/inactive
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/audit: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/car_db: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/ccm_db: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/cm: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/core: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/dp_db: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/installed_options: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/mgetty: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/mohprep: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/patches: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/platform: No such file or directory
8.606/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/syslog: No such file or directory
06/01/2013 18:53:43 platform_pre_install (CAPTURE) find: /var/log/inactive/tomcat: No such file or directory
06/01/2013 18:53:43 platform_pre_install Clean up rpm_archive area
06/01/2013 18:53:43 platform_pre_install Examine /common/rpm-archive/9.1.1.10000-11 for removal
06/01/2013 18:53:43 platform_pre_install /common/rpm-archive/RPMS, /common/rpm-archive/8.6.2.21900-5, /common/rpm-archive/9.1.1.10000-11
06/01/2013 18:53:43 platform_pre_install Platform Pre-install RTMTFinish
06/01/2013 18:53:43 platform_pre_install Platform Pre-install successful
06/01/2013 18:53:43 upgrade_manager.sh Preparation of inactive partition complete
06/01/2013 18:53:43 upgrade_manager.sh Install the OS on inactive partition
06/01/2013 18:53:43 upgrade_manager.sh Calling /common/download/9.1.1.10000-11/Cisco/bin/install_os src_dir=/mnt/source base_dir=/common/download/9.1.1.10000-11 mode=upgrade rpm_archive=/common/rpm-archive/9.1.1.10000-11
06/01/2013 18:53:43 install_os Parse argument src_dir=/mnt/source
06/01/2013 18:53:43 install_os Parse argument base_dir=/common/download/9.1.1.10000-11
06/01/2013 18:53:43 install_os Parse argument mode=upgrade
06/01/2013 18:53:43 install_os Parse argument rpm_archive=/common/rpm-archive/9.1.1.10000-11
06/01/2013 18:53:43 install_os Initialize global data
06/01/2013 18:53:43 install_os Initialize chroot variables
06/01/2013 18:53:43 install_os Initialize RPM repository variables
06/01/2013 18:53:43 install_os Initialize global data complete
06/01/2013 18:53:43 install_os Calling 'source /common/cisco/install/setup/utils.sh'
06/01/2013 18:53:43 install_os Copy /mnt/source/Cisco/install/os_rpm_list to /common/cisco/install
06/01/2013 18:53:43 install_os Calling 'cp /mnt/source/Cisco/install/os_rpm_list /common/cisco/install'
06/01/2013 18:53:43 install_os Copy /mnt/source/Cisco/install/bin/install_rpms to /common/cisco/bin
06/01/2013 18:53:43 install_os Upgrade OS RTMTStart
06/01/2013 18:53:43 install_os Upgrade OS starting
06/01/2013 18:53:43 install_os Installing the OS on the inactive partition Download
06/01/2013 18:53:43 install_os Generate RAM disk items for the OS install
06/01/2013 18:53:43 install_os Calling 'mkdir -p /partB/dev'
06/01/2013 18:53:43 install_os Calling 'mknod /partB/dev/null c 1 3'
06/01/2013 18:53:43 install_os Calling 'mknod /partB/dev/null c 1 3'
06/01/2013 18:53:43 install_os Calling 'mkdir -p /partB/etc'
06/01/2013 18:53:43 install_os Copy /etc/fstab to /partB/etc/fstab
06/01/2013 18:53:43 install_os Calling 'cp /etc/fstab /partB/etc/fstab'
06/01/2013 18:53:43 install_os Install the OS RPMS
06/01/2013 18:53:43 install_rpms Parse argument list=/common/cisco/install/os_rpm_list
06/01/2013 18:53:43 install_rpms Parse argument repo=/common/rpm-archive/9.1.1.10000-11/RPMS
06/01/2013 18:53:43 install_rpms Parse argument dir=/partB
06/01/2013 18:53:43 install_rpms Parse argument initdb
06/01/2013 18:53:43 install_rpms Process RPMs from /common/cisco/install/os_rpm_list
06/01/2013 18:53:43 install_rpms Get RPMs to install for group base
06/01/2013 18:53:43 install_rpms No packages found for group base. Continue.
06/01/2013 18:53:43 install_rpms Get RPMs to install for group core
06/01/2013 18:53:43 install_rpms Installing 150 RPMs for group core
06/01/2013 18:53:43 install_rpms Calling nice -n 19 rpm --root /partB -i (suppressing output)
06/01/2013 18:53:44 install_rpms Calling nice -n 19 rpm --root /partB -i --nodeps (suppressing output)
06/01/2013 18:54:32 install_rpms Install RPMs for group core - complete
06/01/2013 18:54:32 install_rpms Get RPMs to install for group cucos-application
06/01/2013 18:54:32 install_rpms Installing 22 RPMs for group cucos-application
06/01/2013 18:54:32 install_rpms Calling nice -n 19 rpm --root /partB -i (suppressing output)
06/01/2013 18:54:32 install_rpms Calling nice -n 19 rpm --root /partB -i --nodeps (suppressing output)
06/01/2013 18:54:36 install_rpms Install RPMs for group cucos-application - complete
Cisco cucm 8.6 download06/01/2013 18:54:36 install_rpms Get RPMs to install for group cucos-base
06/01/2013 18:54:36 install_rpms Installing 61 RPMs for group cucos-base
06/01/2013 18:54:36 install_rpms Calling nice -n 19 rpm --root /partB -i (suppressing output)
06/01/2013 18:54:37 install_rpms Calling nice -n 19 rpm --root /partB -i --nodeps (suppressing output)
06/01/2013 18:54:42 install_rpms Install RPMs for group cucos-base - complete
06/01/2013 18:54:42 install_rpms Get RPMs to install for group cucos-platform
06/01/2013 18:54:42 install_rpms Installing 15 RPMs for group cucos-platform
06/01/2013 18:54:42 install_rpms Calling nice -n 19 rpm --root /partB -i (suppressing output)
06/01/2013 18:54:52 install_rpms Install RPMs for group cucos-platform - complete
06/01/2013 18:54:52 install_rpms RPM Process complete
06/01/2013 18:54:52 install_os Generating /etc/modprobe.conf
06/01/2013 18:54:52 install_os Creating /partB/etc/modprobe.conf from /etc/modprobe.conf
06/01/2013 18:54:52 install_os Generate fstab for the inactive partition
06/01/2013 18:54:52 install_os Swapping / and /partB in /partB/etc/fstab
06/01/2013 18:54:52 install_os Calling 'cp /tmp/fstab /partB/etc/fstab'
06/01/2013 18:54:52 install_os Make the initrd image for the new OS on the inactive partition
06/01/2013 18:54:52 install_os HWModel = VMware
06/01/2013 18:54:52 install_os chroot /partB mkinitrd -v /boot/initrd-2.6.18-274.12.1.el5PAE.img 2.6.18-274.12.1.el5PAE
06/01/2013 18:54:54 install_os (CAPTURE) warning: /common/rpm-archive/9.1.1.10000-11/RPMS/kernel-PAE-2.6.18-274.12.1.Creating initramfs
06/01/2013 18:54:54 install_os (CAPTURE) Modulefile is /etc/modprobe.conf
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module ehci-hcd
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module ohci-hcd
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module uhci-hcd
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module ext3: jbd
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module jbd
06/01/2013 18:54:54 install_os (CAPTURE) Looking for driver for device LABEL=/partB
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module mptbase
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module mptspi: scsi_mod scsi_transport_spi mptbase mptscsih
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module scsi_mod
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module sd_mod: scsi_mod
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module scsi_transport_spi: scsi_mod
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module mptscsih: scsi_mod mptbase
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module ata_piix: scsi_mod libata
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module libata: scsi_mod
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module ide-disk
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module dm-mem-cache
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module dm-region_hash: dm-mod dm-log
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module dm-mod
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module dm-log: dm-mod
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module dm-message
06/01/2013 18:54:54 install_os (CAPTURE) Looking for deps of module dm-raid45: dm-message dm-mod dm-mem-cache dm-log dm-region_hash

Cisco Cucm 8.6 Ova Download


06/01/2013 18:54:54 install_os (CAPTURE) Using modules: /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/usb/host/ehci-hcd.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/usb/host/ohci-hcd.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/usb/host/uhci-hcd.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/fs/jbd/jbd.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/fs/ext3/ext3.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/message/fusion/mptbase.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/scsi/scsi_mod.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/scsi/sd_mod.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/scsi/scsi_transport_spi.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/message/fusion/mptscsih.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/message/fusion/mptspi.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/ata/libata.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/ata/ata_piix.ko /lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/md/dm-mem-cache.ko /lib/modules/2.6.18
06/01/2013 18:54:54 install_os (CAPTURE) /sbin/nash -> /tmp/initrd.P21260/bin/nash
06/01/2013 18:54:54 install_os (CAPTURE) /sbin/insmod.static -> /tmp/initrd.P21260/bin/insmod
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/usb/host/ehci-hcd.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/ehci-hcd.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/usb/host/ohci-hcd.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/ohci-hcd.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/usb/host/uhci-hcd.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/uhci-hcd.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/fs/jbd/jbd.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/jbd.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/fs/ext3/ext3.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/ext3.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/message/fusion/mptbase.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/mptbase.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/scsi/scsi_mod.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/scsi_mod.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/scsi/sd_mod.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/sd_mod.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/scsi/scsi_transport_spi.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/scsi_transport_spi.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/message/fusion/mptscsih.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/mptscsih.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/message/fusion/mptspi.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/mptspi.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/ata/libata.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/libata.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/ata/ata_piix.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/ata_piix.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/md/dm-mem-cache.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/dm-mem-cache.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/md/dm-mod.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/dm-mod.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/md/dm-log.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/dm-log.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/md/dm-region_hash.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/dm-region_hash.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/md/dm-message.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/dm-message.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) copy from `/lib/modules/2.6.18-274.12.1.el5PAE/kernel/drivers/md/dm-raid45.ko' [elf32-i386] to `/tmp/initrd.P21260/lib/dm-raid45.ko' [elf32-i386]
06/01/2013 18:54:54 install_os (CAPTURE) /sbin/dmraid.static -> /tmp/initrd.P21260/bin/dmraid
06/01/2013 18:54:54 install_os (CAPTURE) /sbin/kpartx.static -> /tmp/initrd.P21260/bin/kpartx
06/01/2013 18:54:54 install_os (CAPTURE) Adding module ehci-hcd
06/01/2013 18:54:54 install_os (CAPTURE) Adding module ohci-hcd
06/01/2013 18:54:54 install_os (CAPTURE) Adding module uhci-hcd
06/01/2013 18:54:54 install_os (CAPTURE) Adding module jbd
06/01/2013 18:54:54 install_os (CAPTURE) Adding module ext3
06/01/2013 18:54:54 install_os (CAPTURE) Adding module mptbase
06/01/2013 18:54:54 install_os (CAPTURE) Adding module scsi_mod
06/01/2013 18:54:54 install_os (CAPTURE) Adding module sd_mod
06/01/2013 18:54:54 install_os (CAPTURE) Adding module scsi_transport_spi
06/01/2013 18:54:54 install_os (CAPTURE) Adding module mptscsih
06/01/2013 18:54:54 install_os (CAPTURE) Adding module mptspi
06/01/2013 18:54:54 install_os (CAPTURE) Adding module libata
06/01/2013 18:54:54 install_os (CAPTURE) Adding module ata_piix
06/01/2013 18:54:54 install_os (CAPTURE) Adding module dm-mem-cache
06/01/2013 18:54:54 install_os (CAPTURE) Adding module dm-mod
06/01/2013 18:54:54 install_os (CAPTURE) Adding module dm-log
06/01/2013 18:54:54 install_os (CAPTURE) Adding module dm-region_hash
06/01/2013 18:54:54 install_os (CAPTURE) Adding module dm-message
06/01/2013 18:54:54 install_os (CAPTURE) Adding module dm-raid45
06/01/2013 18:54:54 install_os Generating needed devices on the inactive partition
06/01/2013 18:54:55 install_os Installing OS complete.
06/01/2013 18:54:55 install_os Upgrade OS RTMTFinish
06/01/2013 18:54:55 install_os Upgrade OS successful
06/01/2013 18:54:55 upgrade_manager.sh OS install on inactive partition complete