Seagate Backup Plus Making Clicking Noise

Posted : admin On 8/26/2021

Many users have encountered the issue that their Seagate external hard drive is not working or not detecting, either with the light blinking or not. If you are troubled by the very same issue, you will get the most potential solutions here. The way to recover data from your external hard drive with EaseUS Data Recovery Wizard is also provided in case you need.

This page's solutions are divided into two parts: the Seagate external hard drive light is blinking but not working/detecting and the light is not blinking. Directly jump to the part according to your own situation to get fixes:

Workable SolutionsStep-by-step Troubleshooting
Part 1. Hard drive light is blinking but not working/detecting

Fix 1. Change USB Port..Full steps
Fix 2.Turn On USB Root Hub..Full steps
Fix 3. Clean Up Virus..Full steps
Fix 4. Show All Hidden Devices..Full steps
Fix 5. Update Hard Drive Driver..Full steps
Fix 6. Change the Registry..Full steps

Part 2. Light is not blinking

Fix 1. Check the Power Supply..Full steps
Fix 2. Take the External Hard Drive Out..Full steps
Fix 3. Ask for a Replacement..Full steps
Fix 4. Get Manual Data Recovery Service..Full steps

Part 1. Seagate External Hard Drive Light Blinking But Not Working

To some degree, drive noise can be considered normal. This can be true when the heads of the drive are 'parked' which is possible when entering power saving modes or the drive shuts off. With that said, one should be concerned if the drive is making a grinding, scratching, or clicking that which is similar to metal on metal. Clicking/cracking noises from HD itself; SeaTools hangs for 1 hour before even showing up list of available drives for tests; After searching online for possible solution, I've came across forum thread on Seagate's website about people experiencing similar issues. Also there I found a video on youtube where clicking sound was similar to mine. Many people reported that it is common for FA (FreeAgent) drives to die like that and that Seagate does not care whatsoever about their customers.

  • The Seagate Backup Plus 8TB is probably one of the fastest external hard disk drives we've tested. Sure, put a 1TB SSD in an external enclosure and you'd end up with something faster – but.
  • Like the Fast, the Backup Plus/Slim also worked very well in my testing, emitting no noise, vibrations, or heat. Conclusion The Seagate Backup Plus/Slim is one of the most convenient ways to.

It's no longer a new case that storage devices such as USB drive or external hard drive suddenly become undetectable by PC due to unknown reasons. Seagate external hard drive light is blinking but not working or detecting on PC is one of the problems, which is still a troublesome case for many users. The issue of 'Seagate external hard drive light blinking but not detecting' may result from the problems on the hard drive itself or from other non-device errors. To help you fix the matter, we will present you with six effective methods to repair and fix Seagate external hard drive not working error.

Never mind trying the three quick fixes first since minor issues can also result in a problematic external hard drive.

Fix 1. Change USB Port and Reboot PC

Quite often, the Seagate external hard disk light blinking but not being detected issue can be easily fixed by simply changing the USB port and rebooting the computer. To do this, disconnect your external hard drive from the computer. Now turn off the PC for at least 1 minute. Then reconnect the external hard drive via another USB port and turn on the computer. You can also connect the device to another computer if possible to have a try.

Fix 2. Turn On USB Root Hub

Connect your Seagate external hard drive to your PC and the start the following process:

Step 1. Click'Start' and type devmgmt.msc.

Step 2. Open 'Device Manager' and expand 'Universal Serial Bus controllers'.

Step 3. Right-click 'USB Root Hub', click 'Properties', and then select 'Power Management'.

Step 4. Uncheck 'Allow the computer to turn off this device to save power'.

Step 5. Repeat this process for each USB Root Hub in the list and reboot PC.

After this, you should be able to see if Seagate external hard drive is detected by your PC then.

Fix 3. Clean Up Virus

If your computer or Seagate external hard drive is infected by a virus, it may cause the drive not detectable or unreadable. In this case, the best solution for this issue is to use virus cleaning software to wipe out and clean up the virus on your drive and PC. Then you can reboot PC and retry to access the Seagate external hard drive.

If these simple tips fail to help you solve the issue 'Seagate external hard drive light blinking but not working', don't get frustrated. There are three more advanced solutions for you to apply.

Fix 4. Make Seagate External Hard Drive Show Up in PC by Showing All Hidden Devices

Step 1. Click on 'Start', type devmgmt.msc, and select 'Device Manager'.

Step 2. Click 'View' in the menu bar, then select 'Show hidden devices'.

Step 3. Expand all notes by clicking onthe '+' icon.

Step 4. If there are any greyed entries, right-click on it and select 'Uninstall'.

Step 5. Reboot your computer and try again.

Fix 5. Update Hard Drive Driver to Fix Seagate External Hard Drive Not Detecting Error

Step 1. Click on 'Start' and type devmgmt.msc to open 'Device Manager'.

Step 2. Expand'Disk drives', right-click your Seagate external hard drive and select 'Undate driver'.

Step 3. Then check out whether any device shows up as unrecognized or not.

  • If the Seagate external hard drive shows unrecognized, go to the drivers tab and delete/uninstall the driver
  • Then check out whether the external hard drive shows up in 'My Computer/This PC' or not
  • If it doesn't show up, reboot or restart PC
  • If it shows up but disappear later, repeat above steps and go to Disk Management, change the drive letter of your Seagate external hard drive and reconnect it to PC to let PC detect it again

Fix 6. Delete Registry Key to Make Seagate External Hard Drive Detected and Work

Note that any false operation using Registry Editor may result in serious problems. You should be highly careful while following the steps here to delete a Registry key so to make the Seagate external hard drive detected and work again.

Step 1. Click on'Start', type regedt32 and click 'regedt32' to run 'Registry Editor'.

Step 2. Back up your registry by going to 'File' and click 'Export'.

Save the registry keys on your computer.

Step 3. Go to: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E967-E325-11CE-BFC1-08002BE10318};

Step 4. If you see any 'UpperFilter' or 'LowerFilters' on the right side, right-click to delete it.

Step 5. Then close the registry, reboot PC and retry to open your external hard drive again.

Part 2. Seagate External Hard Drive Light Not Blinking

If your Seagate external hard drive is not working nor detecting and the light is not blinking, it may be caused by power supply issues or failed HDD. Here are four methods to deal with a Seagate external hard drive that is not blinking:

Method 1. Check the Power Supply

If there is a power supply issue, your external hard drive won't blink at all when you connect it to your computer. To check the power supply, you can:

Step 1. Change the USB cable.

Step 2. Change the USB port.

Step 3. Connect your external hard drive to another computer if possible.

Method 2. Take the External Hard Drive Out of Its Enclosure Case

The external hard drive you are using actually contains your external hard drive itself and its enclosure. To exclude the issues caused by the enclosure, take your external hard drive out of the disk enclosure and connect your HDD to your computer directly.

If the Seagate external hard drive still won't power up, try one of the two methods below.

Method 3. Ask for a Replacement

If the two tips above don't work, it's highly likely that your hard drive is dead. In this case, if your Seagate external hard drive is still under warranty, go to get a replacement from where you have bought it.

Method 4. Get Manual Data Recovery Service

If your HDD is dead and out of warranty, the best way to recover your precious data on the device is to ask for manual data recovery services. Any existing data recovery software cannot restore files from an external hard drive that has crashed or damaged since it can't be detected by the computer, not to mention perform data recovery on it. (You may be interested in hard drive recovery cost in 2020.)

Part 3. Restore Data from Seagate External Hard Drive

After fixing the Seagate external hard drive not working or not detecting issue, you may now try to open Seagate external hard drive to check your precious data.

If nothing is found or there is data loss on your hard drive, don't worry. Powerful hard drive recovery software - EaseUS Data Recovery Wizard will help you get lost data back. As long as your external hard drive can be detected by your computer and the data is not overwritten by new content, it will retrieve all lost data for you.

Follow to recover data from your external hard drive with a few simple clicks:

By going through three short stages, you can easily find lost data on a Seagate external hard drive.

Step 1. Under the 'External Devices', you should see the Seagate external hard drive showing up after it's correctly connected to your computer. Select the drive and click the Scan button.


Step 2. Soon, the software will find more and more data and display the data in the scan results.

Step 3. You can use the Filter feature to quickly locate some specific file types in the results. Select the target files and click the Recover button.

Part 4. Back Up Seagate External Hard Drive

Besides getting a powerful data recovery tool like EaseUS Data Recovery Wizard, it's necessary to back up your devices or files to reduce the risk of losing data on Seagate external hard drive and other devices.

To make a backup of your precious data, you can use free backup software - EaseUS Todo Backup. It supports the backup of your computer hard drives, external hard drives, USB, memory card, and other conventional storage devices. Whether you want to back up your device or selectively back up the files on it, you can get things done with the software.

Step 1. Connect the external hard drive or USB flash drive to your PC.

Step 2. Run EaseUS Todo Backup and click 'File' on the main window.

Step 3. Select the files that you want to backup to external hard drive or USB. And then click 'Browse' to navigate the external hard drive or USB flash drive as the file backup destination.

Step 4. Click 'Proceed' to execute the file to external hard drive/USB backup operation.

As long as you have a backup available, you will feel less annoyed and more relieved the next time you come across an issue like 'Seagate external hard drive light blinking but not working'. Don't hesitate to give it a try.


This page covers 10 fixes to help people get rid of the Seagate external hard drive is not working/detecting issues with its light blinking or not.

  • As for the Seagate external hard drive light blinking but not detecting, users can refer to Part 1 and pick up any method for help.
  • As for the Seagate external hard drive is neither working nor blinking, revert to Part 2 with provided fixes for help.
  • As for data loss and data protection on storage devices, EaseUS file data recovery software and backup software are always ready to help.

You can also apply the fixes to Toshiba, SanDisk or Samsung external hard drive that has the same error of 'external hard drive not working/detecting but light on' or 'external hard drive not working and light not blinking'.

People Also Ask

This page answers the question of 'How do I fix Seagate external hard drive not detected' with several practical solutions, such as changing the USB port, turning on USB Hub, updating device driver, and deleting the Registry key, etc. However, many users still have questions on external hard drive not showing up.

If you are one of these people, check the FAQs asked by people on Google and the answers we left below each question. Find your preferable answer here.

1. How do I fix a flashing external hard drive?

Usually, when an external hard drive flashing but not recognized, it's probably the device that is not connected correctly or the device has a power supply issue. You can first change the USB hub power settings:

  1. 1). Click Start and type devmgmt.msc and press Enter.
  2. 2). Click Device Manager, expand Universal Serial Bus Controllers.
  3. 3). Right-click on USB Root Hub, choose Properties followed by Power Management.
  4. 4). Disable Allow the computer to turn off this device to save power.
  5. 5). Follow the process for all UAB Root Hub and reboot PC.

Next, you need to update the external hard drive driver to make sure the device driver is updated. For your details, you may refer to flash drive blinking red as a guide.

2. What does a blinking hard drive light mean?

On a healthy external hard drive or USB flash drive, it's entirely normal for the activity light to flash on and off repeatedly, all day long. The continuously flash on and off of device light means that the drive is being written and read from, such as transferring files, running programs, etc.

Windows often wait until your computer is idle so to run specific tasks. That is why you see the hard drive activity light flashing even when you're not doing anything.

3. Why is my external hard drive not showing up?

There are many reasons that may cause your external hard drive not showing up. Here is a list of main causes that stops your device from showing up:

  1. 1). Partition loss: external hard drive shows as unallocated space
  2. 2). Driver letter conflict
  3. 3). External hard drive driver outdated
  4. 4). Problematic connection, USB port/cable damaged
  5. 5). Physical damage on the external hard drive

For a complete solution, you may refer to Hard Drive Is Not Showing Up or Recognized for help. The solutions are applicable to both internal and external hard drives.

A hard drive keeps making a clicking noise always causes panic among users who encounter this issue. Based on our experience, a clicking hard drive may result from minor connection issues or serious hard drive damages. Follow to see why your hard drive is clicking, how to fix a clicking hard drive, and how to recover data from it with EaseUS Data Recovery Wizard.

  • Reading Duration: 3-5 minutes.
  • Difficulty Level: Medium.
  • Supported OS: Windows 10/8/7, Windows Vista/XP, etc.
  • Applies to: Fix hard drive clicking, repair hard disk clicking sound, and make clicking internal/external hard drive work normally without losing any data.

Is your hard drive making noise once you boot up your computer? Do you hear 'click, click, click' noise once your external hard drive is connected to your computer? Don't worry.

This page covers everything that you need to know about the hard drive clicking issue and reliable fixes for this issue.

Overview of Internal/External Hard Drive Clicking
Fix (External) Hard Drive Clicking: Repair Hard Drive Clicking, No Data Loss (5 Fixes)

Pick up a reliable solution here to fix a clicking hard drive. You can jump to the part you're most interested in a quick view:

Workable SolutionsStep-by-step Troubleshooting
Fix 1. Recover Data from Clicking DiskRun EaseUS recovery software > Scan and recover data from clicking disk..Full steps
Fix 2. Change Clicking Disk ConnectionReconnect clicking disk > Change connection cable > Change computer..Full steps
Fix 3. Freeze the Hard DriveClean the dust >Add an extra fan > Stop running computer..Full steps
Fix 4. Send the Hard Drive for RepairContact hard drive manufacturer or local repair center to repair clicking drive..Full steps

Overview of Internal/External Hard Drive Clicking

'When I plugged my WD external hard drive into my laptop, it kept making a clicking noise. A lot of important stuff, including years worth of my kids' pictures on there, were all lost. Does anyone know how I can fix this or get my data back?'

Are you having a similar issue as the case shown here? If your hard drive keeps clicking or making clicking noise on your computer, don't worry.

In this part, you'll learn:

  1. 1. What does it mean if your hard drive is clicking
  2. 2. Is hard drive clicking normal
  3. 3. What causes hard drive clicking

Normally, hard drive clicking is regarded as a sign of a failing hard drive. So is it normal that a hard drive or an external hard drive keeps clicking? No, it's not normal.

When you install a hard drive or connect an external hard drive, you should only be able to see its light blinking without any clicking noises. Check out what does it mean when your hard drive is clicking:

  • Hard disk light is on, having an extremely low running sound: the disk is all right.
  • Hard drive clicks slowly with a small sound: it means it has some connection issue.
  • Hard drive clicks fast, making a loud noise: it could be a 'click of death'.

How does the clicking sound come into being? Actually, the clicking hard drive can either caused by minor issues or severe hardware damages, including:

  • Power supply issue: Insufficient power supply, hard drive spin error.
  • Problematic connection: Incompatible or problematic connection cable.
  • Physical damages: Fire burned, water drowned, high temperature, etc.
  • Hardware issues: Worn/misplaced disk head, damaged service area, damaged PCB, etc.

So how to fix this issue when your (external) hard drive is clicking? Continue reading and check out what to do with a clicking hard drive.

Also Read: How to fix external hard drive blinking but not working issue.

Fix (External) Hard Drive Clicking: Repair Hard Drive Clicking, No Data Loss (5 Fixes)

So how do I fix my clicking sound on my hard drive? If you are having the same question in your mind, check out the state of your hard drive:

And follow to repair the clicking hard drive on your own, with no data loss issue.

Note that if your clicking hard drive is still working and accessible, follow Method 1 or 2 to get data out of your drive first. If the drive is not detected or not recognized at all, jump to Method 3 to start fixing this issue.

Method 1. Recover Data from the Clicking Hard Drive That Still Works

Applies to: Bring data out of clicking hard drive, rescue vital data.

If your hard drive is still detectable and openable, go ahead to back up all your files with free backup software to another secure device immediately. The drive may fail anytime.

However, if the clicking hard drive is detectable but you see no files shown up, you need to recover data from the clicking hard drive. Reliable hard drive recovery software - EaseUS Data Recovery Wizard can help.

As long as your clicking hard drive can be recognized by the computer, you can restore data with the following 3 steps. It will fully scan and recover all found data from the clicking drive at once:

Step 1. Launch EaseUS hard drive recovery software.

Run EaseUS Data Recovery Wizard on your PC and select the drive on your hard disk where you lost or deleted files. Click 'Scan' and let this program scan all lost data and files on the selected hard drive.

Step 2. Check and preview all lost hard drive data.

Find lost hard drive data from 'Deleted Files', 'Lost Files' or use 'Filter' to quickly navigate the lost data. Check and double-click to preview these found files.

Step 3. Restore lost hard drive data to a safe location.

After the preview, select wanted files that you lost on the drive and click 'Recover' to save them. Browse to choose a safe location on your PC or other external storage devices to store these restored hard drive data.

With EaseUS data recovery software, you can also recover data from other file loss issues, such as recover data from failed hard drive.

If data recovery software fails to restore data from your clicking but detectable hard drive, you can turn to a reliable data recovery service in Method 2 for help.

Seagate Backup Plus Making Clicking Noise Canceling

Extended Tips: Data Recovery Software vs. Manual Data Recovery Service

If you don't know how to pick up a data recovery solution for your clicking hard drive, watch this video to learn the differences.

Method 2. Turn to Manual Data Recovery Service

Applies to: Restore vital data from a clicking or problematic hard drive that could not be restored using data recovery software.

You may need further help for tough data loss situations like reformatting drive, RAW disk, partition loss, repartition failures, and system boot error. Consult with EaseUS Data Recovery Experts for cost-efficient one-on-one manual recovery service. They could offer the following services after FREE diagnosis:
1. Unformat the drive
2. Repair the RAID, RAW disk, or operating system
3. Recover lost partition (the one that cannot be recovered by software)

If both Method 1 and Method 2 failed to restore your data, your hard drive will need a manual repair. Follow the fixes below one by one, you may get your clicking hard drive work again.

Pci device driver for windows 7 32 bit free download

The following fixes also work to fix hard drive is not showing up, SD card not detected, USB not recognized issue.

Method 3. Change Hard Drive Connection to Fix Clicking Drive

Applies to: Check and fix problematic hard drive connection cable to fix hard drive clicking issue.

The clicking sound could be an indication of underpowering. Mostly, the insufficient power supply is likely to result in a clicking hard drive, changing the USB port is helpful in some cases. Also, a broken or an incompatible connection cable may also cause a disk clicking error.

Here are the troubleshooting steps for you to try:

Step 1. Check if the connection cable is broken.

If yes, purchase a new cable and reconnect the clicking (external) hard drive to your computer.

Step 2. Check if the power cable is loosened.

If yes, unplug and replug the power cable, connect it to your computer and the drive tightly.

Step 3. Check if you are using a compatible drive.

If you connected a USB.30 external drive via a USB 2.0 cable, the drive may not be recognized and even making clicking noises.

Step 4. Connect the clicking (external) hard drive to another computer.

If the drive still keeps clicking on your computer, try to connect it to another computer.

Step 5. Take the hard drive out of the disk enclosure and connect it as an external disk.

These tips can exclude all the connection issues that may exist. If the clicking noise remains, continue to try other fixes detailed below.

Method 4. Freeze or Cool Down the Hard Drive

Applies to: Fix hard drive clicking issue caused by the overheat or high temperature on disk.

When the hard drive is overheating, you may hear a clicking sound coming out of your computer. Freezing your hard drive can, on one hand, cool down your device, and on the other hand, shrink the components inside to free up the stuck or trapped ones.

To freeze your hard drive, there are several steps that you can follow:

Step 1. Open your computer case or laptop case, check if the fan is covered with dust.

If yes, clear all the dust on the fan.

Step 2. Add an extra fan to your computer and cool down the drive.

Step 3. Stop using the computer and wait for the drive to cool down.

Once the hard drive works again, back up your data or recover data from the hard drive immediately.

Step 4. If the hard drive is too old, replace the old drive with a new one.

Fix 5. Send Clicking Hard Drive for Repair

Applies to: Send clicking hard drive for repair due to physical damage, like a broken head reader, components, etc.

If the clicking sound persists, I'm afraid there are significant hardware issues on your hard drive. In this case, you may need help from specialists to fix the clicking hard drive and recover data from it.

To do so, you have two options for clicking hard drive repair:

  1. #1. Contact the support team of your hard drive manufacturer for help.
  2. #2. Take clicking hard drive to a local hard disk repair center.

The specialists can replace the control board if there is an electrical failure or replace the disk head if it is weak or damaged. Or you can directly send the defective hard drive for a replacement if it's still under warranty.

If the clicking hard drive is beyond repair, switching to a new one is the only choice for you.

The Bottom line

On this page, we explained why is your hard drive clicking, guided you to recover data from a clicking hard drive, and offered 3 fixes for hard drive/external hard disk clicking issue.

Once again, don't ignore the clicking sound on your hard drive. It may be a serious problem. You should first restore data from your drive with reliable EaseUS data recovery software.

Later, you can try to change its connection cables, cool down the drive, or take it for repair based on the causes of the clicking disks. If you still have questions about this issue, check out the questions and answers below for help.

Hard Drive Clicking FAQs

1. What are signs of a failing hard drive?

Here are some signs of impending or failing hard drive:

  • Strange noises, like clicking or humming.
  • Repeated program or disk errors.
  • Frequently popping up error messages.
  • Device not detectable, not recognized, not working.
  • Unable to load data nor system.

Seagate Backup Plus Software

2. Why is my pc making a clicking sound?

  • Low clicking sound: computer is reading and writing data to the hard drive.
  • Loud clicking sound: hard drive is clicking with malfunctioned hard drive head.
  • The computer and hard drive are overheated.

3. What to do with a failing or dying hard drive?

If your hard drive is failing or dying, making a clicking noise, there are some fixes for you to try:

Seagate Backup Plus Making Clicking Noise In Ear

  • Recover data from failing hard drive if it's bootable.
  • Back up data from failing hard drive if it's unbootable.
  • Review dying hard drive by changing power cable, update disk driver, etc.
  • Send drive for repair if it's under warranty.

How To Install Seagate Backup Plus

For a step-by-step guide, you may refer to: What To Do with A Dying Drive.